Bando TL1210 3/4 TL BORE 3/4 (.750) Contactors-4 Pole

Bando TL1210 3/4 TL BORE 3/4 (.750) Contactors-4 PoleBando TL1210 3 4 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

460 V 60 Hz 6P 380 V 50 Hz 6P IE4 400 V 50 Hz 6P IE4 415 V 50 Hz 6P IE4

Frame 284/6TC Output 15 HP (11 kW) Number of Poles 6 Frequency 50 Hz Rated speed 984 rpm Slip 1

Catalog Number EL11306 Enclosure ODP Frame 56 Frame Material Steel Frequency 60

1x(Code G) No load current 68

Tooth ProfileS14M

CAPACITORS 20 MFD 370 VAC EC1460A05SP ELEC CAP

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 4 Overall Length 14

000 HP XP Class and Group None Agency Approvals CSA UR Ambient Temperature 40 °C Armature Current 10

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 90

625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3540 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3 Drawings

EM4103T SPEC

2 LB-FT Locked-Rotor Torque 6 LB-FT Starting Current 6 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S