Bando 7-3VX750 P/A Cog Combo, 3VXM750 S4.5MBando 7 3VX750 Power Ace Cog Combo superior load carrying Power Ace Cog Combo combines the superior load carrying capacity of the Power Ace Cog belt with the banded construction of Bandos Combo series to provide an exceptional belt for troublesome applications. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code H Lifting Lugs Vertical Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 8 AWG Motor Type 1240M Mounting Arrangement F1 Number of Poles 2 Overall Length 34
789 mH Armature Inertia 30
have mechanically linked contacts (IEC / EN 60947-5-1) and mirror contacts (IEC / EN 60947-4-1) that provide adequate operation of the safety circuits of machinery and equipment that need to operate in compliance with international safety standards
71 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B KVA CODE LETTER E LOCKED ROTOR AMPS 49
Series ESWX Panel type Across the line Horsepower (HP) 75 HP Enclosure type Wall mount Thermal Managment None General enclosure options None Main voltage 460 V Control Voltage 120 V Frequency 60 Hz SCCR rating 5 kAIC Disconnect switch type None Bypass type None Control power transformer No transformer required Reactor/Filter None Communication None Control options Reset pushbutton Enclosure rating Type 7/9 Nominal height 389
1 POLES 6 NUMBER SPEEDS 1 RPM 1140 HERTZ 60 VOLTS PRIMARY 208-230/460 V VOLTS 208 VOLTS 2 230 VOLTS 3 460 FRME 56 SHAFT CODE Z STATOR DIAMETER 6
4 TEMP CODE T3 CHP HZ 60-90 INVERTER-TEMP-CODE T3 Performance
lb Locked rotor torque 220 % Breakdown torque 300 % Locked rotor time 23s (cold) 13s (hot) Moment of inertia (J) 7
8 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3517M Mounting Arrangement F1 Number of Poles 4 6 Overall Length 12
Bando - 90-S2M-1032 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1740 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Do Not Use Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Manual Thermal Overload Winding Thermal 1 Location KO Winding Thermal 2 None Drawings
207 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 1
