Bando P52-14M-40 HT QD Timing Belt Pulley (E) Adhesive & self-adhesive articlesBando P52 14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 6 Degree of Protection IP56 Synchronous speed 1200 rpm Output rating 3 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC
Amperage138/69
EM31104 SPEC
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1765 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Height (mm)13
2 % Feedback Device NO FEEDBACK High Voltage Full Load Amps 144
lb Locked rotor torque 190 % Breakdown torque 220 % Locked rotor time 32s (cold) 18s (hot) Moment of inertia (J) 8
4-in-1 HeatMaster - Condenser Fan Motor
04 HOT AMPS 2
Bando - 250-S5M-765 HP Anticipating the demand for energy savings and higher horsepower transmission
Bando - P19H300 The type of pulley used on a Synchro-Link® drive depends on a number of factors
Catalog Number EM4407TS-4 Enclosure TEFC Frame 447TS Frame Material Iron Frequency 60
