Motorbike Foam Filter Cleaner CLEARANCE

Motorbike Foam Filter Cleaner CLEARANCEPlace filter in a suitable vessel. Mix cleaner with water. Depending on the degree of contamination, the dosage must be between 1: 5 and 1: 10 (1 part cleaner to 5 to 10 parts water). Plunge the filter entirely into the cleaning solution and allow to work for 5 10 minutes. Then carefully knead the filter in the solution until it is completely clean both inside and outside. Do not under any circumstances wring the filter out, as this could cause

Extends the service

or wiping with brushes

and ventilate the interior of the vehicle for approx

Regular application gives the optimum appearance

especially developed for moist and dirty conditions

rub the surface with a sponge

Content 300 ml Application One 300 ml can is sufficient for 70 litres of fuel

Test material compatibility in an inconspicuous place before applying if using on sensitive materials

Concentrated degreaser and industrial cleaner that can be diluted with water

hand spray can

thinly coat the cleaned areas with Wheel Hub Paste

125 Millilitres (ML)