Bando P24-S8M-60 STS MPB TB Pulley MOTOR PROTECTIVE CIRCUIT BREAKERS

Bando P24-S8M-60 STS MPB TB Pulley MOTOR PROTECTIVE CIRCUIT BREAKERSBando P24 S8M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). An Explanation of Synchro Link Drive Pitches With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental

9 LB-FT Locked-Rotor Torque 18

155 ID 51XW2520A12

6 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 208-230/460 VOLTS 208 VOLTS 2 230 VOLTS 3 460 FRME 56 SHAFT CODE C STATOR DIAMETER 6

Nominal Outside Length (mm)1280

5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP56 KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 1800 rpm Motor Lead Exit Ko Box Motor Lead Termination Ring Terminals Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 0954M Mounting Arrangement F1 Number of Poles 6 Overall Length 24

Output HP1/2-1/5 Hp

Bando - 4-11MS2060 Ideally suited for short center distances and small diameter pulleys

Load 73° C Break-Down Torque 11

33 % Rated voltage 230 V Rated current 16

5x(Code G) No load current 98

lb Locked rotor torque 229 % Breakdown torque 260 % Locked rotor time 28s (cold) 16s (hot) Moment of inertia (J) 36

7 LB-FT Starting Current 15