NEMA 1 Vehicle Loop Detector with Harness 5-1/2'

NEMA 1 Vehicle Loop Detector with Harness 5-1/2'Vehicle Loop Detector Indoor Enclosure (NEMA 1) Enclosed, requires separate 115VAC power. Wiring harness with plug for detector included. OPEN only (all LiftMaster operators) or SAFETY HOLD OPEN only (operators with type B2, T, TS or T1 control wiring) when vehicle passes over loop wire. Requires a loop of wire embedded in the ground to connect to the detector. Requires 2 wire output connection to door operator and 115VAC power Also known as:

This is a 5" x 5" x 8' Steel Post Insert

This is a 1-3/8" x

Battery bracket not included

How the part fits

Drive your riding lawnmower in and out of your backyard without a hitch with our 72” x 60” Flat Top Double Drive Gate

knock out for Knox key switch

Eliminates need for drop rod

This feature does not look for a close command from the timer-to-close or an auxiliary device

You only need to put the bottom of this drop rod in the ground about 1/2" (if in an area that ever has freezing temps) to hold it from swinging

Designed for minimum 1

Rated for gates up to 25ft

We also carry 10 ft rails