Eye nut Hot Dip Galvanized 3/4-10 * 1-3/4 Quantity:Unity

Eye nut Hot Dip Galvanized 3/4-10 * 1-3/4 Quantity:UnityCreate your own lifting eye by adding an eye nut to a stud or bolt. Galvanized steel eye nuts have a hot dipped finish for more corrosion resistance than zinc plated steel. The nuts have a thread of 3 4 10 and a lenght of 1 3 4. Note: Working Load Limit applies to the eye nut only. The stud or bolt you use will affect the overall Working Load Limit. Eye nuts are for vertical lifting only. Warning: Never use to lift people or items over people. Nuts

Black-oxide steel screws are mildly corrosion resistant in dry environments

electrically conductive

Do not use with coated rope unless the coating is removed

000 psi | Rockwell B79

316 stainless steel shackles have a thick coating for corrosion resistance

these can be used to reinforce the loop of a sling in accordance with ASME B30

This hexagonal bolt has a length of 5" with a threading of 1-8 [Partially Threaded]

This hexagonal bolt has a length of 12 with a threading of 1-8 [Partially Threaded]

These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end

000 psi | Rockwell C33

but their holding power lessens with each use

This hexagonal bolt has a length of 8 with a threading of 1-1/8-7 [Partially Threaded]