Bando TL5040 5 TL5040 5 (5) ACCESSORIES FOR CIRCUIT BREAKERS-MOTORSBando TL5040 5 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.
Rheem51-22859-01
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA EEV CSA CULUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 46
5 FULL LOAD AMPS PRIMARY 87 SERVICE FACTOR AMPS PRIMARY 100 Technical Data
Series GPH2 Panel type SOFT-STARTER Horsepower (HP) 125 HP Enclosure type Wall mount Thermal Managment None General enclosure options None Main voltage 460 V Control Voltage 120 V Frequency 60 Hz SCCR rating 5 kAIC Disconnect switch type Circuit Breaker rotary handle disconnect Bypass type None Control power transformer 100 VA - Open Reactor/Filter None Communication None Control options Start Pushbutton
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1175 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
75 VOLTS 110/220 AMPS 9
Start Type Direct Three-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 110V50HZ/120V60HZ Control devices A-On-Off Button Degree of protection TYPE1 Starters Complements Does Not Contain Rated current (AC-3) 105A Overload relay 75-97 A (RW117) Measuring tool and accessories Not Applicable Button type Unspecified Button color Not Specified Connection Type Not Applicable Downloads
14 IN Power Factor 82 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1
440 HP @ 60 HZ 1
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 10 AWG Motor Type 0748M Mounting Arrangement F1 Number of Poles 4 Overall Length 18
4 POLES 2 NUMBER SPEEDS 1 RPM 3560 RPM 2 3560 RPM 3 3545 RPM 4 2950 RPM 5 2950 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 286 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6210-2Z-J/C3 SHAFT END BEARING 6310-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
lb Locked rotor torque 180 % Breakdown torque 220 % Locked rotor time 63s (cold) 35s (hot) Moment of inertia (J) 0
