Bando P30-14M-85 HT QD Timing Belt Pulley (SK) W50 LINEBando P30 14M 85 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Bando - 10PK2200 Trusted by the world's Top Automakers
CFSWDM3713T-E SPEC
875 IN Speed 3000 rpm 3600 rpm Voltage 208 V 230 V 460 V Wheel Bore Size 0
lb Locked rotor torque 170 % Breakdown torque 229 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 0
53 IN Power Factor 71 Product Family General Purpose Pulley End Bearing Type Sealed Bearing Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
6 a Armature Inertia 4
Degree of Protection IP55 Enclosure IC411 - TEFC Mounting F-1 Rotation¹ Both (CW and CCW) Noise level² 67
Frame 324T Output 30 HP (22 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Part Winding Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Bando - 4PK950F Stretch-type V-ribbed belt employing low-modulus cord
Emerson3111
Bando - 7-5MS730 Ideally suited for short center distances and small diameter pulleys
