1X10X120FSB Shims

1X10X120FSB Shims1" x 10" x 120" Flat single bevel, weld on cutting edge. Good to weld under the front edge of your bucket to give it a wear surface or to replace the front lip of your bucket. If it becomes the new front lip of your bucket you can drill or blow holes in it to match a bolt on edge if you like. LOCAL DELIVERY OR PICK UP ONLY with online sales. If you want motor freight delivery call to arrange.

This is a genuine ESCO Ultralok u25t twin pointed bucket tooth

This bolt on Cutting Edge has an industry standard part number of 4T3010MT and has 4 bolt holes

END BIT SAME AS 1130 & A130

This is a 40pn pin for use with 40s series bucket teeth

It is 3 mm thick with an OD of 90 mm

This k15p flex pin is for use with our k15syl bucket tooth

This bolt on Cutting Edge has an industry standard part number of 12Y7211230 and has 9 bolt holes

45 x 90 x 1

Also known as FX100SYL

1/2" x 6" x 96" Flat single bevel

This bolt on side cutter (can be welded on) is used on excavator buckets and has an industry standard part number of b330

This bolt on Cutting Edge has an industry standard part number of 11842791 and has 8 bolt holes