Bosch - Knock Sensor Kit to Suit Nissan RB20 / RB25 / RB30 / RD28 Include Titanium Hardware:Yes - Titanium Hardware

Bosch - Knock Sensor Kit to Suit Nissan RB20 / RB25 / RB30 / RD28 Include Titanium Hardware:Yes - Titanium HardwareMotorsport KS4 P 3 to 25 kHz Knock Sensor conversion kit Kit to Suit Nissan RB20 RB25 RB30 RD28. For the RB20, RB25, RB30 and RD28 blocks that do not have the correct landing pad for the conventional (RB26 Style) Bosch knock sensor. We've developed a stainless fitting that converts the block to take it properly, this small well designed fitting has the required tapered thread that's easily installed with an allen key as a set and forget conversion for

A31 Cefiro "RB20DT"

Dual Springs

- Cam (switched valve lift / VTEC)

to control the valve irrespective of manifold pressure and shaft seal allows for leak proof operation

HICAS equipped cars have a power steering reservoir level sensor built into the cap and two wires and a float inside the reservoir

G25-550 Reverse Rotation Supercore Reference Data

was removed from Nissan Skyline R33 GTST in relatively good condition and has NO VISIBLE DENTS OR DAMAGE

simple setup and long sensor life are some of the advantages compared to a separate analog input wideband device

CAN Frequency 1Mb/s

CRITICAL INFORMATION:

Pro-Strength Brakeclean (BRAKE400)

000 kilometres but can go longer dependant on conditions