Bando P44-8M-30 HT QD Timing Belt Pulley (SDS) DEFINITE PURPOSE

Bando P44-8M-30 HT QD Timing Belt Pulley (SDS) DEFINITE PURPOSEBando P44 8M 30 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

Catalog Number CECP83584T-4 Enclosure TEFC Frame 145TC Frame Material Iron Frequency 60

83 % Rated voltage 460 V Rated current 329 A L

8x(Code J) No load current 38

Frame 444/5T Output 150 HP (110 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1

00 % Rated voltage 380 V Rated current 173 A L

29 Performance

8 ohms Rated Load Load Point 1 2 3 4 5 6 7 Armature Amps 0

14 A LRC 6

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1425 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

CEM3116T SPEC

516 Line Amps 34

6 POLES 4 NUMBER SPEEDS 1 RPM 1780 RPM 2 1780 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 284 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DI OPPOSITE END BEARING 6210-2Z-J/C3 SHAFT END BEARING 6310-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1